Chromatic Acrylic Binder is a copolymer-based sealer used to combat porosity of surfaces. It is used to calm down defects and imperfection like hairline cracks and trowel marks in plaster to produce a uniform base on which emulsion paint can be applied. It can be on Soft board, lime plaster, gypsum plaster rough cast plaster etc. Chromatic Acrylic Binder is applied on these surfaces to produce a uniform base on which subsequent coats of Emulsion paint can be applied without highlighting defects and imperfections in the plaster i.e. trowel marks and hairline cracks. Chromatic Acrylic binder is thick, liquid and milky white when wet, yet colourless and transparent when dry.
| FINISH: | Low sheen |
| APPLICATION: | By brush or Roller. |
| THINING & MIXING: | Thin with water on surfaces with big open pores i.e. rough cast plaster. Thin Chromatic Acrylic Binder one part to two parts water. On smoother surfaces thin in the ratio of 1:1 with water before use. |
| EQUIPMENT CLEANING: | Use water for cleaning |
| DRYING TIME: | Dries in 1 hour. Re-coatable in 4 hours. |
| COLOUR RANGE: | Transparent when dry. |
| SPREADING CAPACITY: | Depending on surface porosity and texture Approx. 10 – 12m² per litre on smooth plaster. Coverage will greatly be reduced when applied on porous or textured surfaces. |
| PACK SIZES: | 1L, 4L & 20L |
