Chromatic Aluminium Silver Paint


Chromatic Aluminum Silver paint is a single pack, synthetic resin-based coating with Aluminum pigment. It is designed for exterior and interior as a general-purpose finish on steel, wood, galvanized iron and masonry for its decorative and protective qualities. Also used for its reflective qualities on steel storage tanks/containers.

FINISH: Metallic lustre
THINNING AND MIXING: Chromatic White Spirit
EQUIPMENT CLEANING: Clean the masonry trowel with water immediately after use.
DRYING TIME: Touch Dry: 4 Hours. Over coating Time: 16 Hours @ 25oC.
COLOUR RANGE: Metallic Silver
SPREADING CAPACITY: Approximately 5-7M² per litre but can vary depending on the surface texture and porosity
APPLICATION: Brush or spray
PACK SIZES: ½L, 1 litre, 4 litres and 20 Litres
THINNING: Thin with Chromatic Acrylic Road Marking Thinner. The percentage of Thinning depends on the mode of application
DILUTION RATIO: Depends on film thickness applied, type of texture, surface porosity, imperfections, temperature & wastage during painting 12 – 15m²/l per coat on a primed surface. Maximum spread rate per coat is obtained at minimum dry film thickness and vice versa.
Share this