Chromatic Epoxy Enamel is a two component Epoxy based enamel, highly resistant to chemical attack, with tremendous adhesion and resistance to both abrasion and water penetration. It is recommended for Interior use on Prepared Metal (Primed), plaster/Concrete and Wooden Surfaces in High Traffic and sensitive areas like Hospitals , Food Factories , Bottling Plants, Laboratory , Breweries , Bridges, Ships, Storage TANKS and Machinery.
| FINISH: | Gloss |
| APPLICATION: | Apply by brush or spray. |
| METHOD: | Apply 2 coats of Chromatic Epoxy Enamel mixed with Chromatic Enamel Hardener, allowing 24 hours drying time between all coats. |
| MIXING: | Chromatic 2pack Epoxy Enamel should be mixed with Chromatic Epoxy Thinner Hardener in the ratio of 2 parts (Paint) to 1 part (Hardener) by — volume. Ensure that only sufficient material to be used in one working day is mixed as it has limited pot life. |
| DRYING TIME: | Chromatic Epoxy Enamel achieves touch dry in 2 hours, and completely dry in 24 hours. Maximum hardness is achieved after 3 days. |
| COLOUR RANGE: | Black, White and Yellow |
| SPREADING CAPACITY: | 8-10m² (85-107 ft²) per litre of mixture |
| PACK SIZES: | 1 liter, 4 liters and 20 liters |
| THINNING: | Chromatic Epoxy Enamel should be thinned with Chromatic Epoxy Thinner. |
| EQUIPMENT CLEANING: | Chromatic Epoxy Thinner |
| POT LIFE: | 6 – 8 hours |
