Chromatic Hydrosolver Paint Remover


Chromatic Hydrosolver is a non-caustic all purpose paint remover, for all types of paints -Two Pack Epoxies, Acrylics, Cellulose Lacquers, synthetic air drying, baking enamels etc.

Applications Chromatic Hydrosolver can be used for removal of coatings on metal, wood and concrete.
Technical data
Directions for use Apply Hydrosolver generously to the coated surfaces. Allow time for the remover to penetrate and blister the coating. The time taken will vary with type and thickness of the coating. Normally 5 to 10 minutes will suffice, but for stoving and reaction drying paints an interval of up to 30 minutes will be required. Remove softened paint with a glazing knife Wash surface thoroughly with water. Rinse with solvent or cleaning thinner to remove wax and grease.
Pack size 1 litre, 5 litres
Share this