Chromatic NC Spot Putty is a premium single-pack nitrocellulose-based putty in thick paste form designed for use on panel beaten sections of vehicles to even out hammer marks, minor damages and to fill blow holes. It can also be used to fill indentations noticeable after application of the primer.
| ADVANTAGES: | Rapid drying, Hard, Flexible, and good filling and sanding properties. Conditions during application: The temperature of the substrate should be minimum 10°C and at least 3°C above the dew point of the air, measured near the substrate. Good ventilation is required in confined areas to ensure proper drying |
| FINISH | Matt |
| APPLICATION: | The product can be applied by palette Knife or plastic or putty knife. Thin layers are preferred to thick ones which tend to trap solvent under the surface and the final layer should be proud of the surface to facilitate rubbing back to a level surface |
| THINNER & EQUIPMENT CLEANER: | High Gloss Thinner |
| DRYING TIME: | Touch Dry: 10 mins. at 25oC. Can be sanded after 30 minutes Thorough Dry: Up to 1-hour dependent on the thickness of the layer |
| SPREADING CAPACITY: | 2 – 6 m²/kg |
| COLOUR RANGE: | Grey |
| PACK SIZES: | ½ kg, 1 kg and 4 kg |