Chromatic Premix Textured Finish


Chromatic Premix Textured Finish is a versatile interior or exterior resin bonded plaster suitable for either new or previously painted cementitious substrates. It can also be applied on Brick, Masonry, Gypsum Boards and previously painted walls. Its special features include, carefully selected and graded aggregates, special additives, light fast pigments, extenders and pure emulsion giving it remarkable weather resistance and a tough texture. It uses strong fungicides and algaecides to fight mould and algae growth both in the wet and dry film state. It comes in two components of Chromatic Premix Textured Finish (coloured) and Chromatic Premix Textured Finish Basecoat with topcoat tinted to over 3,000 shades. It is an eco-friendly, water based with low VOC Level.

FINISH Matt, high build, textured
COLOUR RANGE: Over 3000 house shades
APPLICATION CRITERIA Application should not be carried out during adverse climatic condition. Applied surfaces to be protected from direct sunlight and rain for 24 hours after application. To be applied with masonry trowel and finished with a plastic/ polystyrene float giving the desired texture. For large sites that require scaffold use, the scaffold should be positioned at a comfortable distance away from the wall not to compromise the application technique
EQUIPMENT CLEANING: Clean the masonry trowel with water immediately after use.
THINNER & MIXING: Chromatic Premix Textured Finish is supplied ready for use. DO NOT THIN.
DRYING TIME: Touch dry 4 hours, through dry 24 hours, hard dry 7 days
SPREADING CAPACITY: 12 – 14m² per 30 kg bucket
Share this