Chromatic Texture Paint


Chromatic Texture Paint is a versatile interior or exterior resin bonded plaster suitable for either new or previously painted cementitious substrates. It can also be applied on Brick, Masonry, Gypsum Boards and previously painted walls. It is uniquely formulated with exceptionally graded aggregates, extenders, light fast pigments, special additives and a Pure Acrylic emulsion to provide superb weather-ability and texture. It uses strong fungicides and algaecides to fight mould and algae growth both in the wet and dry film state. It comes in two components of Chromatic Texture Paint Finish (coloured) and Chromatic Texture Finish basecoat with topcoat tinted to over 3,000 shades. It is an eco-friendly, water based with low VOC Level. Product is made on order with the exception of a few colors that are readily available. Product is strictly Trowel applied.

FINISH: Matt, high build, textured.
THINNING AND MIXING: Chromatic Texture Finish is supplied ready for use. DO NOT THIN.
EQUIPMENT CLEANING: Clean the masonry trowel with water immediately after use.
DRYING TIME: Touch dry 4 hours, through dry 24 hours, hard dry 7 days
COLOUR RANGE: Available in over 3,000 shades.
SPREADING CAPACITY: Texture paste variant 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm Coverage (KG/M²) 2.0 – 2.5 kg/m², 2.5 – 3.0 kg/m², 3.0-3.5 kg/ m², 3.5 -4.0 kg/m², 4.0-4.5kg/ m² Coverage (M²/BUCKET) 12.0 – 15 m²/30kg Bucket, 10.0 -12 m²/30kg Bucket, 8.5 -10 m²/30kg Bucket, 7.5 – 8.5m²’/30kg Bucket, 6.7-7.5 m²/30kg Bucket
APPLICATION CRITERIA: Application should not be carried out during adverse climatic condition. Applied surfaces to be protected from direct sunlight and rain for 24 hours after application. To be applied with masonry trowel and finished with a plastic/ polystyrene float giving the desired texture. For large sites that require scaffold use, the scaffold should be positioned at a comfortable distance away from the wall not to compromise the application technique.
Share this