Chromatic Zinc Phosphate Primer


Chromatic Zinc Phosphate Primer is a single pack, air drying, Alkyd based Primer for Steel. It is used as a corrosion resistant primer for metals, in food factories, bottling plants etc. Also recommended for protection of exposed steelwork in coastal regions and on surfaces subjected to damp and humid weather conditions. Can be used on substrates for collecting and storing drinking water

SUBSTRATES: Galvanized steel, stainless steel, mild steel and suitably primed hard polished alloys & aluminium
ADVANTAGES: Good corrosion and water resistance, adhesion, flexibility and hardness. Non toxic
APPLICATION: The product can be applied by: Brush, roller or spray
DILUTION RATIO: Supplied for use for brush or roller application to smooth surfaces. For spray application thin up to spray viscosity with White Spirit. Avoid over thinning. Stir well before use.
DRYING TIME: Surface Dry: 4hours. Thorough Dry: 8hours. Re-coatable: 16hours.
COLOUR RANGE: Grey, Yellow, white and red
SPREADING CAPACITY: Depends on film thickness applied, type of texture, surface porosity, imperfections, temperature & wastage during painting.10 – 12 m²/l when applied on smooth surfaces. Maximum spread rate per coat is obtained at minimum dry film thickness and vice versa
PACK SIZES: 1 Litre, 4 Litres
Share this